|
| |
M1
GARAND RIFLE PARTS, AMMUNITION & ACCESSORIES
This page
was last updated 07/01/08
All parts listed, unless otherwise noted,
are original U.S.G.I. and are in very good to excellent original condition. We
carefully inspect and gauge where possible all parts before shipment to insure first
quality. We do not ship anything we would not want for our own
rifles! Our parts meet all U.S.G.I. military specifications.
Expect all Springfield manufactured first quality replacement parts. See our Collectors Only Page
for collectable parts by specific manufacturer and scarce items. Prices listed on
this web site are current as of date page updated. Presently, we have
no current catalog. Everything we sell is offered on this website!
M1
GARAND PARTS
(Expect First
Quality Original U.S.G.I. parts!)
Inquire for
availability and pricing of M1 parts not listed on this page
Item # Bolt assembly ( all
U.S.G.I. parts )
 | G3 Extractor 23.95 |
 | G4 Extractor spring & plunger assembly 4.00 |
 | G4a Extractor spring 2.00 |
 | G5 Ejector & spring
assembly 5.50 |
 | G6a Bolt rebuild kit
consisting of; firing pin, extractor, ejector assembly, and extractor spring and
plunger. All first quality new or like new USGI components. 50.00 |
Trigger group components ( all U.S.G.I.
parts )
 | G7 Trigger housing
stripped 40.00 |
 | G12 Clip ejector 3.50 |
 | G14 Hammer pin 2.50 |
 | G15 Hammer plunger 4.00 |
 | G16 Hammer plunger w/wings
Early style 8.00 |
 | G17 Hammer spring 2.50 |
 | G18 Hammer spring housing 8.50 |
 | G19 Trigger/sear assembly 6.50 |
 | G19a Trigger/sear assembly. Early type with
extra hole. 12.00 2/20.00 |
 | G20 Trigger pin 2.50 |
Parts continued ( all U.S.G.I. parts )
 | G21 Bullet guide stamped with notch
12.50 |
 | G22 Bullet guide milled 12.50 |
 | G23 Follower assembly 14.50 |
 | G24 Follower arm 13.50 |
 | G25 Follower arm pin 2.00 |
 | G26 Follower rod 5.00 |
 | G28a Special.
Operating rod spring. 17-7 Stainless steel! Click here for more info on these springs! The best main
spring ever made for the M1 rifle in our and our customers opinion! 8.00 each
2/15.00, 5 for 30.00 |
 | G29 Gas cylinder, gauged and
inspected. 75.00 |
 | G30 Gas cylinder lock, hardened.
These are new post WWII production but not "high-hump." 12.00 |
 | G30a Gas cylinder lock, beveled WWII 13.00 |
 | G33 Lower band 22.00 |
 | G34 Lower band pin rolled 1.00 |
 | G35 Lower band pin solid WWII
type 1.50 |
 | G36 Front handguard ferrule
5.50 |
 | G37 Front handguard liner 5.50 |
 | G38 Stock ferrule assembly with
swivel and screw 16.50 |
 | G39 Stacking swivel 9.95 |
 | G39a Stacking swivel screw 1.50 |
 | G40 Butt swivel (rear) 7.00 |
 | G41 Buttplate with trap door brand
new commercial. Nice copy of the G.I. buttplate. 25.00 2/45.00 |
 | G41a Complete stock metal and
handguard set. You get; new buttplate, both screws, rear swivel, front
stock ferrule assembly, rear handguard clip, front handguard ferrule and spacer. All
first quality parkerized in excellent mint or new condition. Perfect for new
commercial stock and handguard sets or to replace worn or unserviceable metal on your USGI
stock set. special 65.00 add lower band and pin G33 and G34 for 20.00 additional. |
 | G42 Buttplate screw short upper wood
2.50 |
 | G43 Buttplate screw long lower
2.50 |
 | G44 Rear handguard clip 5.00 |
 | G45a Clip latch, pin, and spring set. All
brand new USGI components 26.00 |
 | G46 Clip latch pin 2.00 |
 | G47 Clip latch spring 1.00 |
 | G48 Front sight 14.50 |
 | G49 Front sight screw 1.00 |
 | G50 Front sight National Match.
.062. Best on market. Milled not cast.
29.95 temp out |
 | G50b Rear sight aperture. Hooded.
National match. Smaller peep hole .0520 size 1/2 minute elevation
adjustments. Improves sight picture for more uniform groups. 39.95 |
 | G51 Rear sight spring cover
9.50 |
 | G53 Rear sight aperture 9.50 |
 | G54 Windage knob 16.50 |

**********************************************************************************
Quality
30-06 Ammunition
Good clean non-corrosive boxer
primed (reloadable) surplus 30-06 ammunition. 150 grain FMJ ball . Made
for your M1 rifle and packed on new M1 Garand clips and bandoleers! This is the last
of our supply.
Discounts for retail store walk-in sales when paid with cash or
check!

Above. 200
yard target fired upon with Orion built match conditioned rifle. 1 M.O.A.
The Greek HXP IS the most accurate surplus 30-06 ammunition we have ever
offered!!
Greek HXP. Extremely
accurate and consistent ammunition! Some of the best 30-06 surplus we have ever
had. Bright and clean and appears made yesterday. Non-corrosive and reloadable
brass. Match Quality Ammo at a surplus price!!! This is really good
ammo. Check out our target above. Packed in 8rd M1
rifle clips and bandoleers. 192 rds. per sealed spam can. (4) 48 rd
bandoleers. Vacuum fresh. You get 24 clips and 4 bandoleers along with the
ammo! $70.00 per 192 rd can. shipping
charges below.

Above left: 192 rd spam
can packed in M1 Garand clips. Right: Pallets of HXP spam cans
Shipping
charges: Ammunition orders have much higher shipping charges due to
heavy weight. Shipping prices include UPS standard ground shipping charges,
insurance, fuel surcharge fee, remote destination fee, and packing and handling charges.
192
rd spam can. East of Mississippi. 12.00 per can 2 cans
16.00 West of Mississippi 15.00 per can 2 cans 24.00
2.00 per box UPS
residential delivery address fee will be added to non-commercial delivery addresses.
This is an added UPS charge that we can no longer absorb.
Terms:
Mailed in orders can be prepaid by check or money order and include an eligibility
statement.
Eligibility
Statement: Before we can ship any ammunition you must complete the
following requirements. You can submit a handwritten or typed statement attesting to
the following; "I am at least 21 years old, not a felon, and know of no Federal
or State laws prohibiting me from purchasing this ammunition." A
photocopy of your drivers license is required for proof of age. You can fax, mail,
or email with scan us this information. We cannot process any ammunition order
unless we have the proper I.D. We keep your information private! NOTE! C&R or FFL license holders can fax copy of license
in lieu of sending eligibility statement.
Credit Card
orders on ammunition can be faxed ( 631 205 0353 ) and include the eligibility
statement and photocopy of drivers license to process. Include all numbers and
expiration date, your billing and shipping addresses, phone number, and email
address. Ammunition orders can also be called in ( 631 205 1299 ) and paid for using
your credit card. We only need the eligibility statement once and you may place
future orders for ammunition without having to fax or mail it in again.
Sorry, but no
ammunition sales to our friends in Alaska and Hawaii or states, counties, or
municipalities that prohibit sales of this type of ammunition. If not sure, check
with local authorities. Illinois residents must supply us with FIOD card and State
Photo Id. No ammunition sales to City of Chicago. Additional list below.
Sorry, no
ammunition sales to our friends in: California counties of Napa, Ventura, and
Yolo. Cities; Los Angeles, Oakland, and San Francisco, Massachusetts residents (FFL
dealers O.K.). Maryland; City of Annapolis or Montgomery County. New York
City. Washington DC.
M1
GARAND ACCESSORIES
Many items have
photos. Click "photo" to view and be sure to hit your back button to
return to page!
 | G72a. New Item! Accessory package for newly acquired
M1 rifle. Includes; SD3 M1 Garand Owners Guide, 10 excellent 8 round clips, 1 cotton
bandoleer with cardboards, M1907 leather sling G81a, and buttstock cleaning kit
G79a. All the necessary items to go with newly acquired M1 rifle! Special 90.00
|
 | G72b Same Accessory
package as G72a above with the addition of 192 rounds 30-06 Greek
non-corrosive ammunition loaded on Garand clips in bandoleers in a sealed spam
can! Special 155.00
|
 | G73a 8 round
clip. Excellent-new U.S.G.I. Treat your M1 rifle to genuine
clips! 10 for 9.00 50 for 40.00 100 for 75.00 photo
|
 | G74a 6 pocket cloth G.I.
bandoleers with cardboard insert to protect bandoleer. Holds 48
rounds 30-06 ammo. Excellent/new 3.00 ea. 5/12.00 10/20.00
|
 | G74b Repack kit. 6
excellent 8rd clips and bandoleer with cardboards. 9.00 2/16.00 5/37.50
10/70.00 photo
|
 | G75a Gas cylinder lock
wrench. Use for proper lock-down and tightening of gas cylinder lock on
barrel. Also used to stabilize lock and cylinder when tightening down or removing
gas screw. A must tool for M1 owners or enthusiasts. Precision made. 10.00
photo
|
 | G76a 2 and 5 round
combination clip. Reversible! Loads 2 or 5
rounds. 4.50 ea. 2/8.50 10/40.00 For use in the rapid stages of
high power competition or hunting. Just insert loaded clip, pull the rod
slightly to the rear, and release. Ejects when empty. Instructions
included. photo
|
 | G76b Single round
sled clip. Allows one round loading with one hand. Stays in rifle until
you eject it by pushing in a small tab on the inside of the clip. For slow fire
stages in high power rifle competition. 9.00 each 2/17.00 Instructions
included. Helps to prevent slam fires on single
round loading! photo
|
 | G79a Complete buttstock
cleaning kit. M10 tool, 4 M10 rod sections, slotted tip, grease pot, bore brush,
short oiler, and finger pouch. Fits in 2 holes in stock under buttplate. All
10 pieces! Hard to find accessory! 31.50 photo
|
 | G80a U.S.G.I. Combo
tool w/brush M3A1. Very good condition original tool with new brush!
This is the famous M1 rifle tool that is stored in the buttstock. Used to clean
chamber, remove gas screw, screwdriver for small screws, bolt assembly/disassembly tool,
pin punch, and more! A great handy tool! 28.50 photo
|
 | G80b Brand
new USGI replacement brush for the M3A1 combo tool listed above. 7.00ea.
2/13.00
|
 | G81a M1907 Natural
leather sling with parkerized hardware. A quality reproduction of the original
leather sling used on 1903, 1917, and M1 rifles used during WWII. Manufactured by a
current government contractor to exact U.S. specs using quality materials. Leather
darkens naturally with age or can be treated with your favorite leather dressing. A
high quality sling perfect for collectors and re-enactors 31.50 This item is currenty only available in our G72a and G72b
accessory packages. Will offer this item agian when we have adequate supplies from
our supplier. photo
|
 | G81b M1907 brown
leather sling with parkerized hardware. Same as our G81a natural sling above
but leather has been dyed brown. 34.50 temp
out photo
|
 | G82a Cotton web sling.
Complete. G-Vg serviceable condition. Original USGI. 24.95
|
 | G85a M84 scope rubber
eye piece. Quality reproduction. 15.00 photo
|
 | G86b Slotted tip for M10
rod section or full length one-piece rod. New U.S.G.I. 2.50
|
 | G87a Original U.S.G.I. .30 Cal
bore brush. Bronze. 2.25
|
 | G98a Spring
kit. Brand New un-issued. Kit includes; Our G28a 17-7
stainless steel operating rod spring, clip ejector spring, extractor spring, clip latch
spring, and hammer spring. Tune-up that M1 with this in-expensive but effective
kit! 15.00 2/28.00
|
 | G99a New Expanded Kit!!! Complete recommended spare parts kit.
Firing pin, ejector assembly, extractor, extractor spring & plunger, our new 17-7 stainless steel operating rod spring, hammer
spring, clip ejector, clip latch spring, hammer pin, trigger pin, and follower arm pin.
In our opinion and from our experience, these are the parts most likely to cause
problems and stoppages in an M1 rifle. All parts brand new or excellent
U.S.G.I. All the good handy spares in one package!
70.00
|
 | G100a Blank firing adapter.
Threads on barrel and replaces gas cylinder lock . Held in place by gas
screw. Allows semi auto function with blanks. Easy installation and
removal. 9.95 photo
|
 | G101a 308 Winchester - 7.62 NATO
plastic spacer block. Prevents mistakenly loading full 30-06 clips in M1s chambered
for the shorter 308 or 7.62mm round. ( A dangerous event) U.S. Navy design.
Fits on bullet guide. SALE.
8.00 ea. 2/12.00 5/25.00 larger quantities inquire.
photo
|
COLLECTOR
AND USER BOOKS PUBLISHED BY SCOTT A. DUFF

Scott A. Duff (right) presenting
Anthony Pucci Jr. the first covers of his then new book, The M1 Garand: World War II
at the Allentown. Pa. gunshow in October 1993. Both writers/entrepreneurs have been
good friends since the late 1980s. Photo Elena A. Pucci
 | SD 1 The M1
Garand: World War II. 34.00 Revised
updated edition. If you collect M1 rifles, this is the book for you! 8
1/2" x 11" softbound. 320 pages, 230 photographs! History,
development, and parts identification for both Springfield and Winchester.
Examines development and production of the M1 rifle from conception through the closing
days of WWII. Examines the first Garands and chronicles the evolution of Springfield
Armory and Winchester produced M1s in data sheets and photographs. Collectors are
aided in ID of parts changes through detailed photos and explanations. Collectors
can verify original rifles and/or restore M1s to correct configurations. Month-end
serial number tables ID manufacturing dates. Bayonets, slings and cleaning kits
examined in detail. The best book on the subject for new and advanced collectors!
photo
|
 | SD 2 The M1
Garand: Post World War II. 22.00 8 1/2" x
11" softbound. 139 pages and 99 photos. An in-depth study of M1 rifles
manufactured by Springfield Armory, Harrington & Richardson, and International
Harvester. Examines the post WWII rebuild program at Springfield Armory.
Component variation chronicled in data sheets and photos. Component variation with
period of use. Collectors are aided in ID of parts changes through detailed photos
and explanations. Collectors can verify original rifles and/or restore M1s to
correct configuration. Serial number tables ID manufacturing dates. A great
companion book to The M1 Garand: World War II. photo
|
 | SD 3 The M1
Garand Owners Guide. 20.00 A must book for anyone who
owns an M1 rifle. 125 pages with 49 photographs and 84 line drawings. Written
specifically for the M1 Garand owner. Answers frequently asked questions such as:
"Who made my rifle and when?" "How do I take it apart and put it back
together?" "How do I clean, lubricate, and maintain it?" The
civilian owner of an M1 rifle must understand its operation and function, be proficient at
disassembly, assembly, inspection, and replacement of individual components. photo
|
 | SD 4 The M1
Garand. Serial Numbers and Data Sheets. 9.00
Designed for the collector when examining M1 rifles for possible purchase.
References to production dates and data on original rifles for comparison. Handy
pocket reference, and has helped collectors find those hidden M1 treasures at gun shops
and gun shows. photo
|
 | SD 6 The
M14 Owners Guide. 20.00 The companion book to the M1
Garand Owners Guide. A must book for anyone owning a M14 type rifle.
Complete maintenance is discussed. photo
|
 | SD 8 The M1
Carbine Owners Guide 20.00 By Larry Ruth with Scott A.
Duff. This long awaited book is finally here! Complete maintenance is
discussed, along with the operation, evolution, parts identification, troubleshooting, and
zeroing. A must have book for any carbine owner! photo
|
Ordering
instructions
|